Watch Sensor Gas Analyzer

MaaTec Network Analyzer

2009-02-24T04:53:00.000-08:00

MaaTec Network Analyzer

The MaaTec Network Analyzer is a tool that allows to capture, save, and analyze network traffic on a LAN or a DSL internet connection. You can use it for network troubleshooting, to analyze an existing network infrastructure, or for long-term network monitoring. The Network Analyzer combines following major components in one application:

Protocol Analyzer (or 'packet sniffer') with real-time display
Real-Time Statistics (displayed in tables with sortable columns)
Scheduled Collection of protocol data into one or more files (Pro Version)
Network Load over Time Statistics (per system, protocol, connection, etc.) (Pro Version)
Network Report Generator (Pro Version)

Click on the pictures to open full size screenshots or a demo network report that was created with the application's report generator.

Gas Analyzer

2009-02-07T19:17:00.001-08:00

The Thermal and Evolved Gas Analyzer (TEGA) is a scientific instrument aboard the Phoenix spacecraft. TEGA's design is based on experience gained from the failed Mars Polar Lander. Soil samples taken from the Martian surface by the robot arm are eventually delivered to the TEGA, where they are heated in an oven to about 1,000ºC. This heat causes the volatile compounds to be given off as gases which are sent to a mass spectrometer for analysis. This spectrometer is adjusted to measure particularly the isotope ratios for hydrogen, oxygen, carbon, nitrogen, and heavier gases. Detection values as low as 10 parts per billion. The Phoenix TEGA has 8 ovens, which are enough for 8 samples.

A residual gas analyzer (RGA) is a small and usually rugged mass spectrometer, typically designed for process control and contamination monitoring in the semiconductor industry. Utilizing quadrupole technology, there exists two implementations, utilizing either an open ion source (OIS) or a closed ion source (CIS). RGAs may be found in high vacuum applications such as research chambers, surface science setups, accelerators, scanning microscopes, etc. RGAs are used in most cases to monitor the quality of the vacuum and easily detect minute traces of impurities in the low-pressure gas environment. These impurities can be measured down to 10 − 14 Torr levels, possessing sub-ppm detectability in the absence of background interferences.

RGAs would also be used as sensitive in-situ, helium leak detectors. With vacuum systems pumped down to lower than 10 - 5Torr—checking of the integrity of the vacuum seals and the quality of the vacuum—air leaks, virtual leaks and other contaminants at low levels may be detected before a process is initiated.

Residual Gas Analyzer

2009-02-07T19:16:00.001-08:00

A residual gas analyzer (RGA) is a small and usually rugged mass spectrometer, typically designed for process control and contamination monitoring in the semiconductor industry. Utilizing quadrupole technology, there exists two implementations, utilizing either an open ion source (OIS) or a closed ion source (CIS). RGAs may be found in high vacuum applications such as research chambers, surface science setups, accelerators, scanning microscopes, etc. RGAs are used in most cases to monitor the quality of the vacuum and easily detect minute traces of impurities in the low-pressure gas environment. These impurities can be measured down to 10 − 14 Torr levels, possessing sub-ppm detectability in the absence of background interferences.

RGAs would also be used as sensitive in-situ, helium leak detectors. With vacuum systems pumped down to lower than 10 - 5Torr—checking of the integrity of the vacuum seals and the quality of the vacuum—air leaks, virtual leaks and other contaminants at low levels may be detected before a process is initiated.

Site ContentAnalyzer - CleverStat

2009-02-07T19:15:00.000-08:00

CleverStat is a nifty tool I've been using recently for web site content analysis. Unlike numerous online apps, CleverStat makes a copy of the site on your hard drive and analyzes the entire thing and not only individual pages.

Paramagnetic Oxygen Analyzer

2009-02-07T19:13:00.000-08:00

Within this category, the magnetodynamic or `dumbbell' type of design is the predominate sensor type. Oxygen has a relatively high magnetic susceptibility as compared to other gases such as nitrogen, helium, argon, etc. and displays a paramagnetic behavior. The paramagnetic oxygen sensor consists of a cylindrical shaped container inside of which is placed a small glass dumbbell. The dumbbell is filled with an inert gas such as nitrogen and suspended on a taut platinum wire within a non-uniform magnetic field. The dumbbell is designed to move freely as it is suspended from the wire. When a sample gas containing oxygen is processed through the sensor, the oxygen molecules are attracted to the stronger of the two magnetic fields. This causes a displacement of the dumbbell which results in the dumbbell rotating. A precision optical system consisting of a light source, photodiode, and amplifier circuit is used to measure the degree of rotation of the dumbbell. In some paramagnetic oxygen sensor designs, an opposing current is applied to restore the dumbbell to its normal position. The current required to maintain the dumbbell in it normal state is directly proportional to the partial pressure of oxygen and is represented electronically in percent oxygen. There are design variations associated with the various manufacturers of magnetodynamic paramagnetic oxygen analyzer types. Also, other types of sensors have been developed that use the susceptibility of oxygen to a magnetic field which include the thermomagnetic or `magnetic wind' type and the magnetopneumatic sensor. In general, paramagnetic oxygen sensors offer very good response time characteristics and use no consumable parts, making sensor life, under normal conditions, quite good. It also offers excellent precision over a range of 1% to 100% oxygen. The magnetodynamic sensor is quite delicate and is sensitive to vibration and/or position. Due to the loss in measurement sensitivity, in general, the paramagnetic oxygen sensor is not recommended for trace oxygen measurements. Other gases that exhibit a magnetic susceptibility can produce sizeable measurement errors. Manufacturers of the paramagnetic oxygen analyzer should provide details on these interfering gases.

Brimrose NIR Analyzer

2009-02-07T19:12:00.000-08:00

A new series of miniature near-infrared (NIR) spectrometers is said to offer a cost-effective tool for inspecting incoming raw materials and product quality control. Compact, battery-powered Model 5030 ATOF-NIR Portable Analyzer from Brimrose Corp. of America, Baltimore, allows laboratory tests to be performed anywhere in a plant environment. The instrument, which sells for $28,000 (compared with $40,000 for larger units), is reportedly insensitive to ambient light, vibration, dust, and dirt. Its design allows for quick switchover from solids to liquids, and results appear instantly on its LCD. Applications include material identification or measurement of moisture content and active-ingredient levels. Once the instrument is calibrated, it reportedly can be used by an inexperienced operator.